China cryogenic pneumatic akara valve ụlọ ọrụ na ndị na-emepụta |Teknụzụ mmiri mmiri Hoyee

cryogenic pneumatic control valve Featured Image

cryogenic pneumatic akara valve

Nkọwa dị mkpirikpi:

Pneumatic cryogenic regulating valvụ na-eji maka liquefied eke gas, liquefied mmanụ ụgbọala gas, liquefied oxygen, liquefied nitrogen, liquefied hydrogen.Extended bonnet imewe nke Pneumatic cryogenic regulating valvụ iji hụ na ntụkwasị obi nke azuokokoosisi mbukota & sealing.Pneumatic cryogenic regulating valve okpomọkụ rating: -196°C ～+45C.

Zitere anyị email

Nkọwa ngwaahịa

Mkpado ngwaahịa

Nkọwa nka nka

2.1 mpempe akwụkwọ

Pneumatic cryogenic valve njikwa ụdị ahụ:	kwụ ọtọ site na nkedo globe ụdị
Ụdị nkwụnye valvụ:	ụdị nkwụnye otu oche na-enweghị nha nha
Nha aha:	DN20-200,,NPS 3/4〞~ 8〞
Nrụgide aha:	PN16 ~ 100,Klas 150LB ~ 600LB
Njikọ: flange:	FF,RF,MF,RTJ
ịgbado ọkụ:	SW,BW
Akụkụ flange:	Dị ka IEC 60534 si kwuo
Pneumatic cryogenic valvụ na-achịkwa ụdị Bonnet:	Ⅲ: Obere okpomọkụ agbatị ụdị(-196℃~ 45℃)
Nkwakọ ngwaahịa:	Ụdị V PFTE mbukota, mgbanwe.ngwugwu graphite, wdg.
Akpa akpa:	Metal graphite mbukota
valvụ na-achịkwa pneumatic cryogenic valvụ Onye na-eme ihe:	Pneumatic: multi-spring diaphragm actuator, piston ụdị actuator.

2.2 Cryogenic akara valve nhazi eserese

2.3 Cryogenic akara valve ndepụta ndepụta

Aha akụrụngwa	Ihe njikwa Valve
Ahụ/Bonnet	LCB/LCC/LF2/CF8/CF8M/CF3M
Valve spool/oche	304/316/316L (ihe mkpuchi stelite alloy)
Nkwakọ ngwaahịa	Okiri:-196～150℃bụ PTFE
Gasket	Nkịtị: igwe anaghị agba nchara nwere graphite na-agbanwe agbanwe, Pụrụ iche: Metal eze ụdị gasket
Mkpuchi diaphragm	Nkịtị:Q235, Pụrụ iche:304
Diaphragm	NBR nwere akwa polyester agbasiri ike
Mmiri	Nkịtị:60Si2Mn, Pụrụ iche:50CrVa
valvụ nchịkwa nchịkwa	2Cr13/17-4PH/304/316/316L

2.4Low okpomọkụ ihe adabara okpomọkụ ndepụta

Nkedo		Na-akpụ akpụ
Akụrụngwa	Kachasị arụ ọrụ okpomọkụ	Akụrụngwa	Kachasị arụ ọrụ okpomọkụ
LCB	-46°C	LF2	-46°C
LCC	-46°C	LF2	-46°C
LC1	-59°C	LF5	-59°C
LC2	-73°C	LF9	-73°C
LC3	-101°C	LF3	-101°C
CF8	-254°C	F304	-254°C
CF8M	-254°C	F316	-254°C
CF3	-254°C	F304L	-254°C
CF3M	-254°C	F316L	-254°C

2.5 Cryogenic akara valve arụmọrụ

valvụ na-achịkwa pneumatic cryogenic Njirimara mgbawa	Linear, pasent, mepere emepe ngwa ngwa
Oke ekwenyere	50:1 (CV <6.3 30:1)
Ọnụ ahịa CV	Pasent CV1.6 ~ 630,linear CV1.8 ~ 690
valvụ na-achịkwa pneumatic cryogenic ebili mmiri	Metal akara: IV ọkwa(0.01% kwadoro ikike) Akara dị nro: ọkwa VI(ọkwa ụfụfụ) Ọkọlọtọ mkpofu: GB/T 4213
Pneumatic cryogenic valvụ na-achịkwa arụmọrụ
Njehie dị n'ime %	±1.5
Ọiche nloghachi,%	≤1.5
Mpaghara nwụrụ anwụ,%	≤0.6
Ọdịiche site na mmalite ruo na njedebe,%	±2.5
Egotara ọdịiche njem,%	≤2.5

2.6 Cryogenic akara valve actuator paramita

Usoro Ụdị Valve Control	Pneumatic diaphragm actuator
	PZMA-4~PZMA-7
	Multi-mmiri ụdị
Ojiji	Ụdị na-achịkwa, ụdị ON-OFF
Nrụgide ikuku ma ọ bụ voltaji ọkọnọ ike	Nrụgide ikuku (oke mmiri) 140(20～100)Kpa G 240 (40～200) Kpa G 280 (80～240) Kpa G
Njikọ	Njikọ ọkpọkọ ikuku: RC1/4
Ime ihe ozugbo	Mmụba nrụgide, stem na-agbada, valvụ nso.
Mmeghachi omume	Mmụba nrụgide, azuokokoosisi arịgoro, valvụ meghere.
Mgbama ntinye	40～20mA.DC(na positioner)
Lag	≤1% FS(na positioner)
Ụdị ahịrị	2% FS(na positioner)
Okpomọkụ gburugburu	-10℃～+70℃
valvụ na-achịkwa pneumatic cryogenic Ngwa ngwa	E/P, P/P valvụ positioner, nzacha regulator, valvụ Ntụgharị, solenoid valvụ, mmachi mgba ọkụ Ngwa ndị na-abụghị ọkọlọtọ, chọrọ ndetu ahaziri iche pụrụ iche.

2.7 Cryogenic akara valvụ teknụzụ oke

Dayameta oche (mm)		10	12	15	20	25	32	40	50	65	80	100	125	150	200
Egotara CV	Pasent	1.6	2.5	4.0	6.3	10	16	25	40	63	100	160	250	400	630
Egotara CV	Linear	1.8	2.8	4.4	6.9	11	17.6	27.5	44	69	110	176	275	440	690
Nọmba.nha	Njem	Njirimara mgbaba nhọrọ Cv.( ★ ọkọlọtọ ● kwadoro ○ ahaziri )
DN20	16 mm	●	●	●	★
DN25	16 mm	●	●	●	●	★
DN32	25 mm	○	○	○	○	○	★
DN40			○	○	○	○	●	★
DN50				○	○	○	●	●	★
DNA65	40mm						○	○	○	★
DN80							○	○	○	●	★
DN100							○	○	○	●	●	★
DN125	60mm									○	○	○	★
DN150											○	○	●	★
DN200											○	○	●	●	★
Onye na-eme pneumatic Mpaghara diaphragm, Ae(cm2)		PZMA-4					PZMA-5			PZMA-6			PZMA-7
Onye na-eme pneumatic Mpaghara diaphragm, Ae(cm2)		280					400			600			1000
Omume	Oke mmiri	valvụ na-achịkwa pneumatic cryogenic Ọdịiche nrụgide enwere ike imechi metal (MPa)
Ikuku mepere	20-100KPa	4.46	3.09	1.98	1.16	0.7	0.44	0.28	0.18	0.17	0.11	0.07	0.07	0.05	0.03
	40-200 KPA	6.4	6.4	5.94	3.34	2.14	1.31	0.84	0.53	0.51	0.33	0.21	0.22	0.15	0.09
	80-240 KPA	6.4	6.4	6.4	6.4	4.99	3.05	1.95	1.25	1.18	0.78	0.5	0.51	0.36	0.21
Ikuku nso	20-100KPa	6.4	6.19	3.96	2.23	2.14	0.87	0.56	0.35	0.34	0.22	0.14	0.15	0.1	0.06
	40-200 KPA	6.4	6.4	6.4	6.4	6.4	5.86	3.64	2.3	2.21	1.43	0.91	0.95	0.66	0.37
	80-240 KPA	6.4	6.4	6.4	6.4	6.4	6.4	5.04	3.18	3.06	1.98	1.26	1.32	0.92	0.52