4 ~ 20mA Sleeve ụdị elu nsogbu eletriki akara valvụ nkọwapụta
valvụ akara eletrik Ụdị ahụ: | kwụ ọtọ site na nkedo globe ụdị |
Ụdị spool: | ụdị nkwụnye aka kwesịrị ekwesị |
Nha aha: | DN25-400, NPS 1,~ 16. |
Nrụgide aha: | PN16 ~ 100, Klas 150LB ~ 600LB |
Njikọ: flange: | FF, RF, MF, RTJ |
ịgbado ọkụ: | SW, BW |
Akụkụ flange: | Dị ka IEC 60534 si kwuo |
ZAZM Sleeve eletriki akara valvụ Bonnet ụdị: | Ⅰ: ọkọlọtọ ụdị (-20℃ ~ 230℃) Ⅱ:Radiator ụdị: (-45℃ ~ elu karịa 230℃ oge) Ⅲ: Obere okpomọkụ agbatị ụdị (-196℃ ~ -45 ℃) Ⅳ: Ụdị akara n'okpuru Ⅴ: Ụdị mkpuchi mkpuchi ọkụ |
Nkwakọ ngwaahịa: | V ụdị PFTE mbukota, mgbanwe.ngwugwu graphite, wdg. |
Akpa akpa: | Metal graphite mbukota |
Onye na-eme ihe: | Eletriki: DZK usoro actuator. |
4 ~ 20mA Sleeve ụdị elu nsogbu eletriki akara valve ndepụta ihe
Aha akụrụngwa | Ihe njikwa Valve |
Ahụ/Bonnet | WCB/WCC/WC6/CF8/CF8M/CF3M |
Valve spool/oche | 304/316/316L (ihe mkpuchi stelite alloy) |
Nkwakọ ngwaahịa | Nkịtị: -196 ~ 150 ℃ bụ PTFE, RTFE,> 230 ℃ bụ mgbanwe graphite |
Bellows | 304/316/316L |
Gasket | Nkịtị: igwe anaghị agba nchara nwere graphite na-agbanwe agbanwe, Pụrụ iche: Metal eze ụdị gasket |
4 ~ 20mA Sleeve ụdị elu mgbali eletriki akara valve arụmọrụ
Eletriki akara valve Njirimara | Linear, nha nha, emeghe ngwa ngwa | |
Oke ekwenyere | 50:1 (CV <6.3 30:1) | |
Ọnụ ahịa CV | Pasent CV1.6 ~ 630 , linear CV1.8 ~ 690 | |
valvụ njikwa eletrịkị enwere ike ịgbapụta | Metal akara: IV ọkwa (0.01% gosiri ikike) Akara dị nro: ọkwa VI (ọkwa ụfụfụ) Ọkọlọtọ mkpofu: GB/T 4213 | |
ZAZM Sleeve eletriki njikwa valve arụmọrụ | ||
Njehie dị ime (%) | ±1.0 | |
Ọiche nloghachi(%) | ≤1.0 | |
Mpaghara nwụrụ anwụ(%) | ≤1.0 | |
Ọdịiche site na mmalite ruo ọgwụgwụ(%) | ±2.5 | |
Egotara ọdịiche njem (%) | ≤2.5 |
4 ~ 20mA Sleeve ụdị elu nsogbu eletriki akara valvụ pụrụ iche chọrọ
Nnwale pụrụ iche | Nchọpụta ntụpọ nbanye ihe (PT), ule radiator (RT), nnwale njirimara eruba, ule okpomọkụ dị ala. |
Ọgwụgwọ pụrụ iche | Kpachapụta ọgwụgwọ nitrogen, ọgwụgwọ alloy siri ike oche. |
Ntucha pụrụ iche | Ngwọta iweda ala na akpịrị ịkpọ nkụ |
Ọnọdụ pụrụ iche | Pịpụ ma ọ bụ njikọ pụrụ iche, ọnọdụ agụụ, ihe nkedo SS, mkpuchi pụrụ iche. |
Akụkụ pụrụ iche | Haziri ihu na ogologo ihu ma ọ bụ akụkụ |
Nyochaa na nyocha | Akuko ule ndị ọzọ |
4 ~ 20mA Sleeve ụdị elu mgbali eletriki akara valve actuator Parameter
Ụdị valvụ njikwa eletriki | Igwe ọkụ eletrik |
3810L usoro | |
Ụdị agbakwunyere ọgụgụ isi | |
Ojiji | Na-achịkwa |
Nrụgide ikuku ma ọ bụ voltaji ọkọnọ ike | Ike: AC 200V± 10% 50Hz Ma ọ bụ ike: AC 380V± 10% 50Hz |
Njikọ | Ụdị nkịtị: eriri eriri 2-PF (G1/2〞) Ihe mgbawa: mkpuchi mkpuchi PF(G3/4〞) |
Ime ihe ozugbo | Mgbama ntinye aka na-abawanye, stem na-agbada, valvụ nso. |
Mmeghachi omume | Mgbama ntinye ntinye, mgbama rịgoro, valvụ meghere. |
Mgbama ntinye | Ntinye / mmepụta 4 ~ 20mA.DC |
Lag | ≤0.8% FS |
Ụdị ahịrị | ≤+1% FS |
Okpomọkụ gburugburu | Ụdị ọkọlọtọ: -10℃~+60℃ Na ikpo oku oghere: -35℃~+60℃ Ihe mgbawa: -10℃~+40℃ |
Ngwa njikwa valvụ eletriki | Igwe ọkụ oghere (ụdị nkịtị) Ngwa ndị na-abụghị ọkọlọtọ, chọrọ ndetu ahaziri iche pụrụ iche. |
4 ~ 20mA Sleeve ụdị elu nsogbu eletriki akara valvụ oke
Ọnụ ala dayametaDN | 25 | 40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 | 250 | 300 | 350 | 400 |
Ọnụego nrịbama nke Kv | 11/10 | 27/25 | 44/40 | 69/63 | 110/100 | 176/160 | 275/250 | 440/400 | 690/630 | 940/850 | 1200/1050 | 1400/1225 | 1600/1400 |
Nrụgide aha PN MPa | 1.6 4 6.4 | ||||||||||||
egwuregwu DKZ actuator | DKZ-4200 | DKZ-4300 | DKZ-5400 | DKZ-5500 | DKZ-5600 | ||||||||
egwuregwu Cepai actuator | A+Z64 | A+Z160 | |||||||||||
Oke njem mm | 16 | 25 | 40 | 60 | 100 | ||||||||
Njirimara mgbawa | Nha nhata ahịrị | ||||||||||||
Ụdị omume | Mgbama ntinye ntinye, valvụ nso ma ọ bụ megidere ya | ||||||||||||
Oke okpomọkụ | Nkịtị okpomọkụ: -20 ~ 200 ℃ thermal Fin ụdị: -60 ℃ 450 ℃ |
Mara: Enwere ike ịhazi valvụ njikwa otu oche buru ibu dịka onye ọrụ chọrọ